7-44
Removal and Installation
HP Designjet Ultra Low End Printer Service Manual
Print Platen Assembly
Removal
Switch off the product and remove the power cable.
1. Remove the Center Cover
⇒
Page 7-7.
2. Remove the Right End Cover
⇒
Page 7-9
.
3. Remove the Left End Cover
⇒
Page 7-11.
4. Remove the Starwheel Assembly
⇒
Page 7-
43.
5. Release the Belt from the Print Platen
Assembly.
6. Remove 1 T-10 screw that secures the
Spr
ing Idler. Remove the Spring Idler from
the Printer.
To Next Page
Loading...