Service Tests and Utilities
3-32 HP Designjet T Series — Service Manual
3 The Sensors test starts and the Front Panel prompts you to verify default
sensor positions:
4 Verify that the sensors are in the default positions and any key to continue.
5 The Window sensor test starts and the Front Panel prompts you to open the
Wi
ndow:
6 Open the Window.
7 Press any key to continue.
8 The Window sensor test continues and the Front Panel prompts you to close
the W
indow:
9 Close the Window.
10 Press any key to continue.
11 The Media Lever sensor test starts and the Front Panel prompts you to raise
the Medi
a Lever:
12 Raise the Media Lever.
13 Press any key to continue.
To Next Page
Loading...