EasyManua.ls Logo

HP Designjet T1100 - Page 92

HP Designjet T1100
490 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Error Codes
2-32 HP Designjet T Series — Service Manual
System Error: 87:YZ
Problem
Description:
Problem finding the Scan-axis encoder reading.
Corrective Action: Try the following:
1 U
pgrade the firmware.
2 C
lean the Encoder Strip.
3 R
eplace the Encoder Strip. See Encoder Strip, spring and attachment nut
(T1100/T1100ps/T610) on page 6-96 or Encoder Strip, spring and
attachment nut (T1120/T1120ps) on page 6-99.
4 R
eplace the Carriage PCA. See Carriage PCA (T1100/T1100ps/T610) on
page 6-173 or Carriage PCA (T1120/T1120ps) on page 6-178.
5 R
eplace the Trailing Cables. See Trailing Cable (T1100/T1100ps/T610) on
page 6-102 or Trailing Cable (T1120/T1120ps) on page 6-109.
System Error:
93:YZ
Problem
Description:
Unable to pressurize the Ink Delivery System. The ISS Motor does not move
as expected.
Corrective Action: Try the following:
1 S
witch the Power OFF from the back of the Printer and disconnect the Power
cord. Reconnect the power cord and power On the Printer.
2 P
erform the Ink Delivery System diagnostic test to further troubleshoot the
problem. See
7. Ink Delivery System (IDS) on page 3-36.
3 R
eplace the Left Ink Supply Station, depending on the results of the
diagnostic test. See
Left Ink Supply Station on page 6-183.
4 A
fter replacing the Left Ink Supply Station, if the problem persists replace the
Main PCA. See
Electronics Module Main PCA and PSU (T1100/T1100ps/
T610) on page 6-202 or Electronics Module Main PCA and PSU (T1120/
T1120ps) on page 6-205.
System Error:
94:YZ
Problem
Description:
Color calibration Error.
Corrective Action: Try the following:
1 Pr
ofiling failed due to a different error (not algorithm / data processing).
2 P
erform the Line Sensor calibration. See Troubleshooting, Line Sensor. See
The Line Sensor has Problems Detecting Media on page 1-5.
3 If
the System Error continues, replace the Line Sensor. See Line Sensor
(T1100/T1100ps/T610) on page 6-152 or Line Sensor (T1120/T1120ps)
on page 6-157.
4 If
the System Error continues, replace the Carriage PCA. See Carriage PCA
(T1100/T1100ps/T610) on page 6-173 or Carriage PCA (T1120/
T1120ps) on page 6-178.

Other manuals for HP Designjet T1100

Related product manuals