Carriage encoder system
The encoder strip tension is also fixed by a tensioning spring. However, there is a mechanism to hold it
in position after the spring places the strip at one specific tension. This is to prevent the spring from
continually applying force over the encoder strip; which, over time and temperature changes, could
make it creep.
NOTE: When assembling the encoder strip, ensure that it is placed in the right orientation using the
smiling symbol located on the sides of the encoder strip.
NOTE: Due to the proximity of the encoder strip to the greased sliding rod, it is easy to dirty the strip
with grease when performing any repair operation in the area. Please clean any grease from the
encoder strip if necessary. A dry cloth can be used for this purpose, to prevent any deformation or
strain on the encoder strip while performing the cleaning.
28 Chapter 1 Printer fundamentals ENWW
To Next Page
Loading...