2. Remove the Scraper from the Service Station.
Vacuum Fan
Removal
WARNING! Switch off the printer and remove the power cable.
1. Remove the Right Cover See Cover, Right on page 224.
2. Remove the Primer Assembly
See Primer Assembly on page 239.
3. Remove the Primer Valves
See Primer Valves on page 241.
4. Remove the Maintenance Cartridge ⇒ See the User’s Guide.
5. Remove the Service Station
See Service Station on page 244.
6. Disconnect the cable labelled on the Vacuum Fan PCA as “Interconnect Cable”.
ENWW
Disassembly order
249
To Next Page
Loading...