7. Print your book, using the Print button in the Book Layout Editor.
●
Presets Name list: select your book preset.
●
Select Copies and Pages to print.
●
Paper Size: select the paper size on which you want to print the job.
●
Orientation: select the orientation of your image on the paper.
●
ColorSync Profile: select the correct color profile for the printer and paper that you will use.
●
Select Black Point Compensation.
●
Gamma: Because computer displays are illuminated, images displayed on computers tend
to look more luminous than when printed. Increasing the Gamma from the default of 1.0 can
compensate for this. Usually, a setting 1.1 to 1.2 is adequate.
8. Click the Printer Settings button.
●
Printer: select the printer (for example, HP Designjet Z2100 24in Photo).
●
Select Paper Type/Quality from the drop-down menu, then select the Paper tab.
●
Paper Type: select the paper type that is currently loaded into the printer.
ENWW Color management scenarios 73
Color management
To Next Page
Loading...
