EasyManua.ls Logo

HP DesignJet Z5600 - Cannot connect to the Internet; Web Services issues

HP DesignJet Z5600
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced button and add the printer's IP address to the list of exceptions, for which the proxy server is
not used.
In Safari for Mac OS X, go to Safari > Preferences > Advanced and click the Proxies: Change Settings
button. Add the printer's IP address or its domain name to the list of exceptions, for which the proxy
server is not used.
If you still cannot connect, switch the printer o and back on with the Power key on the front panel.
Cannot connect to the Internet
If your printer has diiculty in connecting to the Internet, it may start the Connectivity Wizard automatically.
You can also start the wizard manually at any time.
From the Embedded Web Server: select Support > Connectivity troubleshooting > Connectivity
wizard.
NOTE: You cannot change connectivity settings from the Embedded Web Server.
From the front panel: Press , then , then Connectivity > Connectivity wizard.
From the front panel: Press , then , then Internal prints > Service information prints > Print
connectivity
cong. In this case, the results are printed out.
NOTE: The results printed out are from the last run of the Connectivity wizard, so you must already
have run the Connectivity wizard in order to get any results.
The Connectivity Wizard performs a series of tests automatically. You can also choose to perform individual
tests. From the front panel, press
, then , then Connectivity > Diagnostics & troubleshooting >
Diagnostics & troubleshooting. The following options are available.
All tests
Network connectivity test: Check the printer's connection to the local area network.
Internet connectivity test: Check the printer's connection to the Internet.
HP Connected test: Check the printer's connection to HP Connected.
Firmware update test: Check the printer's connection to HP's rmware update servers.
If any test fails, the printer describes the problem and recommends how to solve it. You can modify settings
and rerun the test, unless you are using the Embedded Web Server or the settings are protected.
Web Services issues
For any issues with HP ePrint, see HP Connected: http://www.hpconnected.com.
Automatic le system check
When you turn on the printer, you will occasionally see a front panel display similar to the one shown below.
ENWW Cannot connect to the Internet 159

Table of Contents

Related product manuals