●
Embedded Web Server > Allow EWS: Specify whether the Embedded Web Server is enabled.
●
Web Services > HP DesignJet Utility software: View the HP DesignJet Utility software settings.
●
Web Services > Color and paper management: View the color and paper management settings.
●
Restore factory settings: restore the initial default values of the network settings.
Change the graphic language setting
You can change the graphic language setting from the HP DesignJet Utility with the following steps.
1. Under Windows, select the Settings tab then Printer settings > Printing preferences.
Under Mac OS X, select Printer settings > Congure printer settings > Printing preferences.
2. Select one of the following options.
●
Select Automatic to let the printer determine which type of le it is receiving. This is the default
setting; it works for most software applications. You should not normally need to change it.
●
Select HP-GL/2 only if you are sending a le of that type directly to the printer, without going
through a printer driver.
●
Select PDF only if you are sending a le of that type directly to the printer, without going through a
printer driver.
●
Select PostScript only if you are sending a le of that type directly to the printer, without going
through a printer driver.
●
Select TIFF only if you are sending a le of that type directly to the printer, without going through a
printer driver.
●
Select JPEG only if you are sending a le of that type directly to the printer, without going through
a printer driver.
You can change the graphic language setting from the front panel. Press , then , then
Setup >
Advanced printing preferences > Graphics language. Select the desired option.
NOTE: If the graphic language is set from the HP DesignJet Utility, it overrides the front panel setting.
Manage Printer security
When you have set up Web Services, the printer is in unlock mode. In unlock mode, anyone who knows your
print
er's email address can print to your printer by just sending a le to it. Although HP provides a spam
ltering service, you should be careful about giving out your printer's email address, as everything sent to
that address may be printed on your printer.
If you are the printer administrator, you can manage Printer security or change your printer status to lock
mode by visiting HP Connected at http://www.hpconnected.com. You can also customize your printer's email
address and manage print jobs from there. At your
rst visit, you will need to create an account at HP
Connected.
Change your printer’s email address
You can change your printer's email address at HP Connected: http://www.hpconnected.com.
ENWW Change the graphic language setting 31
To Next Page
Loading...