HP DesignJet Z5600 - To create your own paper preset

4. On the Import page, select the paper preset le that you downloaded in step 1.
5. Click the Update button and wait for the update process to nish. It may take some time. The printer will
automatically restart when the update is complete; wait until it has restarted and the front panel
indicates that it is ready.
6. Check that the new paper type appears in the Additional paper or Custom paper category in your
printer's front panel.
7. Under Mac OS X only, synchronize the new paper type with the driver by opening the HP DesignJet
Utility. Select your printer, then Paper Preset Management and Synchronize Paper Presets (
button).
Now that you have imported the paper preset, you can select the paper type from the front panel and from
the Mac OS X driver. The ICC prole for the new paper type is ready to use by your application.
To create your own paper preset
Before using a custom paper type with your printer, you should add a paper preset for the new paper. You can
create a new paper preset using the HP Color Center in the HP DesignJet Utility.
The paper preset name will appear in the printer driver and the front panel.
To create a paper preset, you can follow this simple procedure:
1. Go to the Color Center tab in the HP DesignJet Utility for Windows, or Paper Preset Management in the
HP DesignJet Utility for Mac OS X.
2. Select Create New Paper Preset (Windows) or press the + button (Mac OS X).
3. Enter your paper's name.
TIP: The paper's commercial name is likely to be the most understandable for other users of the
printer.
4. Select a paper category from the drop-down menu. The paper category determines the amount of ink
used and other basic printing parameters. For more information, see the online help in the Color
Center, and http://www.hp.com/go/Z2600/paperpresets or http://www.hp.com/go/Z5600/
paperpresets. The available categories are:
●
Bond and Coated Paper: Fiber-based, thin papers with a matte surface. These papers use matte
black ink, relatively low ink limits and high carriage position.
●
Photo Paper: Photo-base, relatively thick papers with a variety of nishing from matte to satin to
glossy. These papers use photo black ink, with the exception of Photo Matte Papers, relatively high
ink limits and low carriage position, with the exception of Baryte and Photo Matte Papers.
Generally they will print with the starwheels up.
●
Backlit: Synthetic translucent materials that use photo black with high ink limits, high carriage
position and starwheels up.
5. Click Next under Windows, Continue under Mac OS.
6. Load your custom paper, see Load a roll into the printer on page 35 or Load a single sheet on page 39.
You will nd the paper name in the Custom paper category in the front panel.
7. Choose the ICC prole name in the Color Center. This is the name you will use to select the prole in your
application.
If you wish, use the Change Printing Properties button to change the following properties:
44 Chapter 5 Paper handling ENWW