Connect a new printer
If you have not connected the printer to your computer, or you want to connect another new printer of the
same model to your computer, you can use the following instructions to set up the connection.
NOTE: Use this method if you have already installed the printer software.
To connect a new printer (Windows)
1. Open the printer software. For more information, see
Open the HP printer software (Windows)
on page 13.
2. In the printer software, click Utilities.
3. Select Printer Setup & Software.
4. Select Connect a new printer. Follow the on-screen instructions.
To connect a new printer (OS X)
1. Open System Preferences.
2. Depending on your operating system, click Print & Fax, Print & Scan, or Printers & Scanners in the
Hardware section.
3. Click + below the list of printers at the left.
4. Select the new printer from the list.
ENWW Connect a new printer 37
To Next Page
Loading...