ENWW 2-6
Using the print cartridges
Replacing the print cartridges
Use only the recommended print cartridges. See “HP supplies and accessories” for part
numbers and ordering information.
To load the print cartridges:
1 Turn the printer on and open the top cover.
The print cartridge cradle will move to the center of the printer.
2 Flip up the print cartridge latch, grasp the top of the old print cartridge, and pull it up and
out of its cradle.
3 Remove the new print cartridge from its package, and without touching the ink nozzles or
contacts, gently remove the tape covering the ink nozzles.
4 Push the new cartridge down firmly into its cradle slot, and close the print cartridge latch.
5 Close the printer’s top cover.
To Next Page
Loading...
