53
changing the printer’s wireless feature
USB cable and printer driver required
To change the printer’s wireless settings, you must have the following:
• A PC that is connected to the printer with a USB cable
• A printer driver that has been installed to a DOT4 port
A USB cable is not required for Bluetooth printing.
install USB driver
Follow these steps to install a USB printer driver:
1. Insert the Starter CD into the computer’s CD-ROM drive.
2. Follow the onscreen instructions.
Follow these steps to verify that the USB printer driver has been installed:
1. Click
Start > Settings > Printers.
The Printers window appears.
2. Verify that two copies of the printer appear. One version is set to Bluetoooth
wireless printing. The other version, hp deskjet 450 series (Copy 2), is set to
the DOT4 port.
To Next Page
Loading...