ENWW 3-4
6 Follow the instructions supplied with your notebook to send the job to print.
During the information transfer process, the notebook projects a solid infrared
beam to the printer and the infrared LED turns green. When the information
transfer is complete, the beam and LED turn off.
Bluetooth printing
If you use a notebook computer equipped with Bluetooth technology, you can
establish a wireless connection with the printer to send a print job.
For a Bluetooth connection, you need to ensure the followings.
A Bluetooth CompactFlash™ card installed in the printer’s CF card slot.
Your Bluetooth host device is supported by the printer
Bluetooth printing is enabled in your device.
See http://www.hp.com/support/dj450
for a list of supported Bluetooth devices
and refer to the manufacturer’s documentation for more instructions.
1 Insert the Bluetooth CF card into the printer’s CF card slot.
2 Install the printer software.
a Insert the Starter CD into the CD-ROM drive, and then follow the
appropriate procedure for your operating system and connection.
b Select either USB or Parallel and click Skip when prompted to connect
the printer.
3 Perform printer discovery with your host device (see the onscreen
Bluetooth Printing Guide).
4 Select the printer from the list of Bluetooth-enabled printers.
To Next Page
Loading...