ENWW 4-3
-or-
Insert the media print (glossy for photos) side up into the input tray, making
sure that the right edge of the media is squarely against the alignment
guide. Adjust the paper guide until it fits snugly against the left edge of the
media.
*Glossy side
Printing cards
For Windows
1 Open the printer driver.
2 On the Setup tab, select the paper type you are using from the Paper Type
menu. For example, if you are printing on HP Glossy Greeting Card Paper,
select this from the menu.
3 Select the card size from the Paper Size menu.
4 Change any other print settings if necessary, then click OK to print the
card(s).
1
2
3
1
2
3
For PDA printing instructions, refer to the documentation that comes with your
PDA printing software.
To Next Page
Loading...