ENWW 4-7
Press the
Cancel button if you do not want to print directly from the CF card.
If your computer is connected to the printer via USB or parallel, the CF card
appears as a drive in Windows Explorer. You can then open and print your
photographs with the software application of your choice.
Printing on transparencies
For best results, use HP Premium Plus Inkjet Transparency Film, which is
specifically designed to work with the printer, or other transparency film that is
designed for inkjet printers.
1 Remove all media from the input tray.
2 Insert the transparencies with the print (rough) side up and the adhesive
strip pointing forward into the input tray.
3 Slide the paper guide until it stops at the edge of the transparencies.
1 Back of adhesive
2 Print (rough) side up
Do not remove the CF card until the print job is completed. Otherwise the print
job will be canceled.
Selecting Typical Installation when you install the printer driver (see Installing
Software) lets your computer read the CF card as a physical disk drive. You can
then access your photo files and print them with the software of your choice.
Please see the readme.txt file on the Starter CD for more details.
Due to the printer's unique paper path, please load transparencies with the print
side up. The print side of the transparencies is the rougher side.
For PDA printing instructions, refer to the documentation that comes with your
PDA printing software.
To Next Page
Loading...