Chapter 5 - Maintaining and troubleshooting78
• You are not running too many programs when performing a print job. Close programs that you are not
using or restart the computer before attempting the print job again.
• Any necessary software, such as Printboy for Palm OS users, is installed in the host device if using a
Bluetooth connection. Make sure your Bluetooth settings are correct. See Bluetooth wireless connection.
• Your wireless network settings are correct if using an 802.11 connection. See 802.11 wireless
connection.
• You created a DPOF file on your digital camera memory card, if you are trying to print directly from
the card. See Printing from memory cards and USB Flash drives.
To Next Page
Loading...
