If the light is on and flashing
Verify that the correct print cartridges are installed.
If you were printing a borderless document when the light started flashing, follow the
borderless printing guidelines.
Otherwise, follow these steps:
1 Open the printer cover, remove the print cartridge on the right, and then close the
cover.
2 Follow one of these steps:
– If the light is flashing: Open the printer cover, replace the print cartridge that
you removed, and then remove the other print cartridge. Go to step 3.
– If the light is off: A problem exists with the print cartridge that you removed. Go
to step 3.
3 Manually clean the print cartridge.
4 After cleaning the print cartridge, reinsert it into the printer.
If the light continues to flash, replace the print cartridge.
All lights are flashing
The printer might need to be restarted.
1 Press the Power button to turn off the printer, and then press the Power button to
restart the printer.
Proceed to step 2 if the lights continue to flash.
2 Press the Power button to turn off the printer.
3 Disconnect the printer power cord from the electrical outlet.
4 Reconnect the printer power cord to the electrical outlet.
5 Press the Power button to turn on the printer.
User's Guide 91
To Next Page
Loading...