out of paper
if the In tray or lower tray contains paper
1. Slide the paper forward until it stops.
2. Adjust the length guide so that it touches the paper stack.
3. Press the Resume button.
if the In tray or
lower tray is empty
1. Load paper in the tray.
2. Press the Resume button.
will not feed paper
if the In tray or lower tray contains paper
Try one or more of the following:
● Reduce the number of sheets in the paper tray.
● Remove and reload the paper tray.
● Use a different type of paper.
printer does not turn on
1. Disconnect the power cord from the printer.
2. Wait approximately 10 seconds.
3. Reconnect the power cord to the printer.
4. Press the Power button to turn on the printer.
To Next Page
Loading...