resume light is flashing
the printer may be out of paper
1. Place paper in the In tray or the
lower tray.
2. Press the Resumebutton on the front of the printer.
there may be a paper jam
Follow these instructions
to clear a paper jam.
the printer may be ready to print the second side of a two-sided document
1. Follow the onscreen instructions for printing the second side.
These instructions appear when you
manually print a two-sided document.
2. Press the Resume button.
power light is flashing
the printer is preparing to print
The light stops flashing when the printer has received all data.
all lights are flashing
the printer may need to be restarted
1. Press the Power button to turn off the printer, then press the Power button to
restart the printer.
Proceed to step 2 if the lights continue to flash.
2. Press the Power button to turn off the printer.
3. Disconnect the printer from the power source.
4. Reconnect the printer to the power source.
5. Press the Power button to turn on the printer.
To Next Page
Loading...