3. Release the paper lever.
4. Slide the paper-width guide against the edge of the cards.
Print
1. Open the Page Setup dialog box, and then select the following settings:
– Paper Size: The appropriate paper size
Note To print a borderless card, click the borderless photo size that
matches the card size.
– Orientation: The appropriate orientation
2. Click OK.
3. Open the Print dialog box.
4. Select the Paper Type/Quality pane, and then select the following settings:
– Source: Rear tray
– Paper Type: The appropriate paper type
– Quality: Normal or Best
5. If you want to use them, set the HP digital photography options.
6. Select any other print settings that you want, and then click Print.
Use the Auto Two-Sided Print Accessory with Small Paper Tray when printing from
a digital camera
In order to use the Auto Two-Sided Print Accessory with Small Paper Tray when printing
directly from a digital camera, you might need to configure the printer to feed paper from
the accessory rather than the In tray.
User's guide 117
To Next Page
Loading...