EasyManua.ls Logo

HP DW017B - StorageWorks Ultrium 448 Tape Drive - Operating and Storage Environment

HP DW017B - StorageWorks Ultrium 448 Tape Drive
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Do not attempt to clean the tape path or tape guides inside the cartridge.
Do not leave cartridges in the drive. The tape loses tension in the power-off state, which can lead
to problems, par ticularly if the drive has been moved.
Do not leave cartridges in excessively dr y or humid conditions.
Do not leave cartridges in direct sunlight or in places where magnetic elds are present (for
example, under telephones, next to monitors or nea r transformers).
Do not drop car tridges or handle them roughly.
Stick labels onto the label area only.
Do not bulk erase (or degauss) Ultrium format cartridges because this will render them unusable.
Operating an
d storage environment
To prevent c
ondensation and for long life, the cartridge s hou ld o nly be operated or stored as follows:
Operation: 10
0
Cto45
0
C(50
0
Fto113
0
F)
Day-to-day storage (in plastic container): 16
0
Cto32
0
C(60
0
Fto90
0
F)
Non-conden
sing relative humidity: 10% to 80% (operating), 20% to 60% (non-o perating)
Wet bu lb temperature should not exceed 26
0
C(79
0
F)
Tap es intended for long-term storage should be stored in the plastic containers, at temperatures between
5
0
Cand23
0
C(41
0
Fand73
0
F) and 20% to 60% relative humidity.
64
Use the correct media

Table of Contents

Other manuals for HP DW017B - StorageWorks Ultrium 448 Tape Drive

Related product manuals