14. If it is necessary to replace the display hinge cover and/or hinges, rotate top of hinge cover away from
display enclosure to disengage the tabs (1), and then pull the cover o the enclosure (2).
The display hinge cover is available in the Hinge Kit using spare part number L13683-001 for non-touch
displays and L17975-001 for touch screen displays.
15. If it is necessary to replace the display hinges, remove the three Phillips M2.5x11.0 screws that secure
each hinge (1), and then remove the hinges from the display enclosure (2).
Display hinges are available in the Hinge Kit using spare part number L13683-001 for non-touch
displays and L17975-001 for touch screen displays.
70 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
