17. If it is necessary to replace the WLAN antenna cables, peel the antennas from the top of the display
enclosure (1), remove the antenna cables from the routing path on the bottom of the display enclosure
(2), and then remove the antenna cables (3).
NOTE: The WLAN antennas are included with the display enclosure and available in the Antenna Kit,
spare part number L19428-001.
18. If it is necessary to replace the WWAN antenna cables, peel the antennas from the top of the display
enclosure (1), remove the antenna cables from the bottom and sides of the display enclosure (2), and
then remove the antenna cables (3).
NOTE: The WWAN antennas are included with the display enclosure and available in the Antenna Kit,
spare part number L19428-001.
The display enclosure is available using spare part number L14929-001 for models without a WLAN
module and L14926-001 for models with a WWAN module.
72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
