10. Remove the display bezel (4).
The display bezel is available using spare part number L28402-001.
11. If it is necessary to replace the camera module:
▲
Remove the tape from atop the module (1), lift upward to disengage the module from the adhesive
on the display enclosure (2), disconnect the cables from the left and right sides of the module (3),
and then remove the camera module from the display (4).
The IR camera module is available using spare part number L15509-001. The microphone module is
available using spare part number L15512-001.
70 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
