i. Separate the display assembly from the computer (2).
2. To replace display assembly subcomponents:
a. Flex the bottom (1) and the inside edges of the left and right sides of the bezel (2) to release it.
b. Release the top of the bezel (3), and then remove the bezel from the display (4).
Bezels are available as the following spare part numbers.
NOTE: When replacing the bezel, be sure that the replacement bezel matches the original bezel.
N08135-001: RGB camera (with ambient light sensor)
N08134-001: IR camera (with ambient light sensor)
N49534-001: OLED display
N08136-001: Microphone
Display assembly
65
To Next Page
Loading...
