HP EliteDisplay E243 User Manual

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP EliteDisplay E243 23.8-inch Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
I/F Board*1, Control Board*1, Power Board*1, USB
Board*1
4
Batteries
All types including standard alkaline and lithium coin
or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps Panel*1
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
Power board(C605)
1
External electrical cables and cords
DP cable*1, VGA cable*1, USB cable*1, Power
cord*1
All are inside monitor carton box
4
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0

HP EliteDisplay E243 Specifications

General

Screen Size	23.8 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	IPS
Aspect Ratio	16:9
Brightness	250 cd/m²
Contrast Ratio	1000:1
Viewing Angle	178° horizontal / 178° vertical
Stand Adjustments	Height, Tilt, Swivel, Pivot
Weight (with stand)	5.6 kg
Refresh Rate	60 Hz
Color Support	16.7 million colors
VESA Mount	100 x 100 mm
Response Time	5 ms (gray to gray)
Ports	DisplayPort, HDMI, VGA, USB

Summary

Items Requiring Selective Treatment

Tools Required for Disassembly

Product Disassembly Process

Separate Base and Column

Separate the base and column by hand, then use a tool to separate the monitor head and stand.

Remove Rear Cover

Use a tool to remove screws from the rear cover, then separate the rear cover from the monitor head by hand.

Disassemble Cables and Chassis

Disconnect lamp wire, LVDS FFC, and ctrl-BD FFC, then disassemble the chassis from the panel.

Disassemble Control Board

Remove the control board from the panel and bezel, then separate the panel and bezel by hand.

Remove PCBs and Connectors

Release screws on PCBs, tear gaskets, and separate all connectors on PCBs.

Separate Base and Base Cover

Tear rubber foot from base, release screws from base plate, and separate base plate and cover.

Separate VESA Mount

Use tool to release screws and separate the VESA mount from the stand.

Disassemble Front and Back Covers

Disassemble the front cover by hand and then the back cover by hand.

Separate Hinge Components

Use tool to release screws and separate hinge module, hinge shield, and constant force springs.