Humidity - Operating
20% to 80% non-condensing
Humidity - Non-
operating
5% to 95%, 38.7° C max wet-bulb
Altitude - Operating
0 to 5,000 m
(16,404 ft)
Altitude - Non-
operating
0 to 12,192 m
(0 to 40,000 ft)
White LED Backlight
Yes
CCFL Panel
No
Arsenic-Free Display
Glass
Yes
Low Halogen
4
Yes
Mercury- Free Display
Backlighting
Yes
Environmental Data
Eco-Label Certifications
& Declarations
This product has received or is in the process of being certified to the following
approvals and may be labeled with one or more of these marks
IT ECO declaration
US ENERGY STAR®
TCO 06 and TCO Certified Edge
EPEAT® Gold where HP registers commercial display products. See
http://www.epeat.net
for registration status in your country US Federal
Energy Management Program (FEMP)
Energy Consumption
(in accordance with US
Energy Star test
method)
115VAC, 60Hz 230VAC, 50Hz 100VAC, 60Hz
Normal Operation
19.90 W 19.92 W 20.03 W
Sleep
0.64 W 0.64 W 0.65 W
Off
0.23 W 0.25 W 0.23 W
Heat Dissipation
*
115VAC, 60 Hz 230VAC, 50 Hz 100VAC, 60 Hz
Normal Operation
68 BTU/hr 68 BTU/hr 69 BTU/hr
Sleep
2 BTU/hr 2 BTU/hr 2 BTU/hr
Off
1 BTU/hr 1 BTU/hr 1 BTU/hr
* Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one
hour.
Additional Information
This product is in compliance with the Restrictions of Hazardous
Substances (RoHS) directive - 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and
Electronic Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the
Gold level, see
www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per
QuickSpecs
HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
Technical Specifications
DA - 14661 North America — Version 3 — August 19, 2013
Page 5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
