To Previous Page

ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.

The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting

surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the

VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to

determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting

solution is properly installed to support applied loads.

HP Care Pack Services extend service contracts beyond the standard warranties. Service levels and response times for HP Care Packs

may vary depending on your geographic location. Service starts from date of hardware purchase. To choose the right level of service

for your HP product, use the HP Care Pack Services Lookup Tool at http://www.hp.com/go/lookuptool. Additional HP Care Pack

Services information by product is available at http://www.hp.com/hps/carepack.

EPEAT® Gold registered models of this product are available where HP registers commercial display products. See www.epeat.net for

registration status in your country.

External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be

Low Halogen.

All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either

higher or lower. The only warranties for HP products and services are set forth in the express warranty statements accompanying such

products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or

editorial errors or omissions contained herein.

QuickSpecs

HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor

Technical Specifications

DA - 14661 North America — Version 3 — August 19, 2013

Page 9

Questions and Answers:

Need help?

Do you have a question about the HP EliteDisplay E271i and is the answer not in the manual?

HP EliteDisplay E271i Specifications

General

3D	No
Display diagonal	27 \
Display technology	LED
Supported video modes	1080p
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
On/off switch	Yes
USB hub version	2.0
DVI-I ports quantity	0
USB Type-A downstream ports quantity	3
Pivot angle	0 - 90 °
LED indicators	Power
Tilt angle range	-5 - 30 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	40 W
Power consumption (standby)	0.5 W
Power consumption (typical)	35 W
Certification	CE, CB, KC, KCC, NOM, PSB, ICE, TUV-S, CCC, CEL Grade 1, CECP, SEPA, TCO, EPA, ISC, VCCI, FCC, BSMI
Product color	Silver
Country of origin	China
Market positioning	Business
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC
Sustainability certificates	ENERGY STAR

Weight and Dimensions