LEDs."
**If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
†Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the
power button cable is disconnected.
LFF 12-drive model front panel LEDs and buttonLFF 12-drive model front panel LEDs and button
ItemItem DescriptionDescription StatusStatus
1 Health LED* Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is
rebooting
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical**
2 Power On/Standby button
and system power LED*
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing
power on sequence
Solid amber = System in standby
Off = No power present†
3 NIC status LED* Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network
active
Off = No network activity
To Next Page
Loading...
