Power cap LED Off = System is in standby, or no cap is set.
Solid green = Power cap applied
DescriptionDescription StatusStatus
For Networking Choice server models, the embedded NIC ports are not equipped on the server. Therefore, the NIC LEDs on the
Systems Insight Display will flash based on the FlexibleLOM network port activity. In the case of a dual-port FlexibleLOM, only NIC
LED 1 and 2 will illuminate to correspond with the activity of the respective network ports.
When the health LED on the front panel illuminates either amber or red, the server is experiencing a health event. For more information
on the combination of these LEDs, see Systems Insight Display combined LED descriptions ).
1
To Next Page
Loading...
