2. Load paper.
●
Insert a stack of paper into the paper tray with the short edge forward and the print side
down.
●
Slide the paper forward until it stops.
●
Slide the paper-width guides inward until they stop at the edges of the paper.
3. Push the paper tray back in.
4. Change or retain the paper settings on the printer display.
To load legal paper
1. Pull out the paper tray, slide the paper-width guides outward, and then remove any previously
loaded media.
2. Unlock and open the front side of the paper tray.
3. Load paper.
12 Chapter 2 Get started ENWW
To Next Page
Loading...