Power connector cable
Description Spare part number
Power connector cable (includes bracket) 686593-001
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the base enclosure (see
Base enclosure on page 43).
5. Disconnect the battery cable (see
Battery on page 44).
6. Remove the subwoofer (see
Subwoofer on page 65).
7. Remove the USB/Audio board (see
USB/Audio board on page 66).
Remove the power connector cable:
1. Turn the computer, with the right side toward you.
2. Disconnect the power connector cable (1) from the system board.
3. Remove the double-sided tape (2) from the power connector.
Component replacement procedures
67
To Next Page
Loading...
