HP ESG Series - Page 231

5-122
Hardkey and Softkey Reference
Preset
Table 5-4. Factory-Defined Preset Conditions
Amplitude
Parameter Condition Parameter Condition
Amplitude -135 dBm Amplitude Increment Persistent State
Amplitude Offset 0.00 dB Amplitude Offset Increment Persistent State
Amplitude Reference State Off Amplitude Reference 0.00 dBm
Attenuator Hold Off ALC On
Power Search Manual ALC BW Normal
Amplitude Modulation
Parameter Condition Parameter Condition
AM Path 1 AM Off
AM Depth 0.1% AM Depth Increment Persistent State
AM Rate 400 Hz AM Rate Increment Persistent State
AM Source Internal AM Waveform Sine
AM Depth Coupling Off
Display
Parameter Condition Parameter Condition
Brightness Persistent State Inverse Video Persistent State
Screen Saver (Off/On) Persistent State Screen Saver Mode Persistent State
Screen Saver Delay Persistent State Contrast Persistent State
Frequency
Parameter Condition Parameter Condition
Frequency Max. Specified Frequency Increment Persistent State
Frequency Offset 0.00 Hz Frequency Offset Increment Persistent State
Frequency Reference State Off Frequency Reference 0 Hz
Frequency Multiplier 1 Phase Adjustment 0.000 Radians
Phase Adjustment Increment Persistent State Phase Noise Optimization Mode 2