9-14
Specifications
HP ESG Series Signal Generators Specifications
LF Out (Internal Modulation Source)
External Modulation Inputs
Resolution: 0.1 Hz
Pulse Only: 4 µs
Frequency Accuracy: 0.005%
Swept Sine Mode (Frequency, Phase Continuous):
Operating Modes: Triggered or Continuous Sweeps
Frequency Range: 0.1 Hz to 50 kHz
Sweep Time: 1 ms to 65s
Resolution: 1 ms
Dual Sinewave Mode:
Frequency Range: 0.1 Hz to 50 kHz
Amplitude Ratio: 0 to 100%
Resolution: 0.1%
Amplitude: 0 to 3 Vpk into 50Ω
Output Impedance: < 1Ω
Modulation Types:
Ext 1: FM, ΦM, and AM
Ext 2: FM, ΦM, AM, and Pulse
High/Low Indicator:
(100 Hz to 10 MHz BW,
AC-coupled inputs only)
Indicator is activated when input level error exceeds 3%
(nominal)
To Next Page
Loading...
