EasyManua.ls Logo

HP Integrity rx2800 - i2 - Page 3

HP Integrity rx2800 - i2
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
b) In the Choose the script operating system field, select Windows and click Next.
c) In the Script Run Location field, select On the client computer.
d) In the Automation pre-boot environment field, select WinPE Managed (64 bit).
5. Add a Run Script task to assign a letter to the HPSP partition and capture it. Follow these steps:
a) Select Run this script and enter the following script:
rem Mounting and capturing HPSP
rem Verifying if target system has OEM partition
@echo off
set /a str=0
echo list volume |diskpart |find "400 MB" > temp.txt
for /F "usebackq delims==" %%i IN (`type temp.txt`) DO set str=%%i
rem IF the target system does not have OEM, exit script
if "%str%"=="0" goto nohpsp
rem Creating diskpart script to mount OEM partition
set volume=%str:~9,1%
echo mounting HPSP as letter Y on volume %volume%
echo select volume %volume% > diskpart.txt
echo assign letter=Y >> diskpart.txt
echo exit >> diskpart.txt
rem Executing diskpart to mount HPSP
diskpart /s diskpart.txt
del diskpart.txt
rem Capturing HPSP
echo Capturing HPSP
%ALTIRIS_SHARE%\waik\tools\ia64\imagex /append Y:
%ALTIRIS_SHARE%\hpfeatures\ws6-ia64-en_us\images\w2k8image.wim "HPSP
partition" /verify
set returncode=%errorlevel%
:nohpsp
echo HPSP not found
set /a returncode=0
:end
del temp.txt
exit /b %returncode%
b) In the Choose the script operating system field, select Windows and click Next.
c) In the Script Run Location field, select On the client computer.
d) In the Automation pre-boot environment field, select WinPE Managed (64 bit).
6. Add a Distribute Software task to re-install minimal ISP components. Follow these steps:
a) In the Name field, enter .\hpfeatures\ws6-ia64-en_us\oem\sysprep-post.cmd.
b) Select Copy all directory files.
7. Add a Power Control task. Follow these steps:
a) Select Restart.
b) Select Force applications to close without a message.
8. Execute the job on the managed server. After the job is completed, the images of ESP, HPSP, and
MSDATA partitions are stored in the Altiris shared directory ready to be deployed.
3

Other manuals for HP Integrity rx2800 - i2

Related product manuals