HP Integrity Superdome SX1000 - Removing and Replacing the Blower Side Bezels; Removing the Blower Side Bezels

Chapter 3
Removing and Replacing Components
Removing and Replacing the Blower Side Bezels
108
Removing and Replacing the Blower Side Bezels
The cabinet has two blower side bezels. These are cosmetic covers for the blowers and are located on the right
and left side of the blower module housing. The blower side bezels are easily replaced.
Figure 3-21 Blower Side Bezel Locations
Removing the Blower Side Bezels
The bezel is held on at the top by the bezel lip fitting over the blower housing frame and secured at the bottom
by tabs that fit into slots on the cabinet side panels.
Side Bezels