HP Integrity Superdome SX1000 - Select Active Standard Error Devices

Appendix C
EFI Boot Maintenance Manager for hp Integrity Superdome
Select Active Standard Error Devices
222
Select Active Standard Error Devices
The “Select Active Standard Error Devices” option selects from a list the standard error device. It provides a
means to select from a list the error devices The selections menu is very similar to that shown in Figure C-6.
To select a device from the list, use the up arrow or down arrow to highlight the option, then press enter. If the
change is to be stored, select the “Save Settings to NVRAM” options and press enter.