HP Integrity Superdome SX1000 - JET Interactive Mode; JET Run Menu

Appendix G
JUST Exploration Tool
JET Interactive Mode
278
JET Interactive Mode
The interactive mode allows the user to run JET, display the current system configuration, and to update that
configuration. To run in the interactive mode, enter jet -i at the prompt. When entering the interactive
mode, the following is displayed:
Figure G-3 Interactive Mode Display
% jet -i
JET Interactive MAIN MENU!
Select from the following options.
1) Run JET.
2) Display current configuration data.
3) Update configuration.
X) Exit
Enter selection:
Select one of the options from the menu.
JET Run Menu
By entering a 1 at the main JET menu, it is placed in the run mode. Figure G-4 shows the run menu options.
You may either interrogate all complexes of an individual complex.
Figure G-4 JET Run Display
JET Interactive RUN MENU!
Select from the following options.
1) Interrogate all complexes.
2) Select a complex to interrogate.
X) Return to previous menu.
Enter selection:
When interrogating a single complex (entering option 2), the following is displayed:
Figure G-5 Individual Complex Interrogation Menu
JET Interactive COMPLEX SELECTION MENU!
Select from the following options.
1) feynman-s.
X) Return to previous menu.
Enter selection: 1
In this case, the only complex available is feynman-s. If other complexes were available, they would be listed
as well. shows a typical complex configuration.
Figure G-6 Typical Complex Configuration Dump