Appendix H
Templ ate s
Computer Room Layout Plan
304
Computer Room Layout Plan
Use the following procedure to create a computer room layout plan:
Step 1. Remove several copies of the floor plan grid.
Step 2. Cut and join them together (as necessary) to create a scale model floor plan of your computer room.
Step 3. Remove a copy of each applicable equipment footprint template.
Step 4. Cut out each template selected in Step 3; then place it on the floor plan grid created in Step 2.
Step 5. Position pieces until the desired layout is obtained; then fasten the pieces to the grid. Mark
locations of computer room doors, air-conditioning floor vents, utility outlets, and so on.
To Next Page
Loading...
