Chapter 2
Installing the System
Booting and Verifying the System
67
Booting hp Integrity Superdome to EFI Shell
After powering on (or using the CM bo command), all partition console windows will show activity while the
firmware is initialized and will stop momentarily at an Boot Manager menu.
Figure 2-45hp Integrity Superdome EFI Boot Manager
Use the up-down arrows on the keyboard to highlight EFI Shell (Built-in) and press enter. Do this for all
partitions.
For all partitions, after selecting EFI Shell and pressing enter, much activity is viewed in the console window,
but it will cease and the EFI shell prompt appears as shown in Figure 2-46.
To Next Page
Loading...
