iPAQ Pocket PC H3800 Series Reference Guide 93
Troubleshooting
My Compaq iPAQ Pocket PC is not responding or an application hangs
Perform a soft reset of your Compaq iPAQ Pocket PC
1. Insert the stylus into the unit reset switch at the bottom of your Compaq iPAQ Pocket PC
2. Press the switch for 1 second
I forgot my password
Perform a hard reset of your Compaq iPAQ Pocket PC
CAUTION: Because most of the applications and data you install on your Compaq iPAQ Pocket PC are
stored in memory, you will need to reinstall them if you perform a hard reset.
1. Press and hold the two outside application buttons
2. Insert the stylus into the unit reset switch at the bottom of your Compaq iPAQ Pocket PC
3. Press the switch for 5 seconds
4. To reactivate your Compaq iPAQ Pocket PC, insert the stylus into the unit reset switch
and press the switch for 1 second or connect your Compaq iPAQ Pocket PC to the AC
adapter
I want to restore the default assignments to the application buttons
1. From the Start menu, tap Settings
2. Tap Buttons
3. Tap Restore Defaults
4. Tap OK
I want to address an e-mail message, but I cannot find the @ symbol
1. Tap the up arrow next to the Input Panel button
2. Tap Keyboard to display a keyboard on the screen
To Next Page
Loading...
