HP iPAQ hx2000 Series - Changing the Backlight Settings

0DQDJLQJWKH%DWWHU\
8VHU·V*XLGH ²
■ Turn off the “Receive all incoming beams” setting and
receive infrared beams manually instead. Refer to Chapter 2,
“Synchronizing with Your Computer.”
■ You can program an Application Button to turn off the screen
when an MP3 is playing, thus saving battery power used to
run the screen. Tap Start > Windows Media > Tools >
Settings > Buttons. From the Select Function drop-down
list, tap Screen Toggle. Press either the Contacts or Inbox
application buttons on the front of your iPAQ Pocket PC, and
then tap OK.
■ Power off your Pocket PC when it is being charged to allow it
to charge at a faster rate.
Changing the Backlight Settings
To adjust the backlight settings in order to conserve more battery
power:
1. From the Start menu, tap Settings > System tab >
Backlight.
2. Select from the following backlight settings:
■ Battery Power
■ External Power
■ Brightness
3. Make your changes to the backlight settings, and then tap
OK.
Battery Saving Tip: Set the backlight to go off quickly after
you stop using your iPAQ Pocket PC, or change the
brightness level to save power.