Table 11-17 Warning labels
Risk of burns Crush hazard Risk of trapped
fingers
Hazardous moving
part
Light radiation
hazard
Electric shock
hazard
For more safety information, see Safety precautions on page 4
■
Follow step 1 to step 5 in Replace the power-box fan filters (8VJ66A) on page 218.
Finish replacement
The following steps provide the complete procedure for this topic.
1. Ensure that all windows, covers, and doors are closed and remain in their original positions.
2. Turn on the printer.
Replace the print-zone filter
The following sections provide details for this topic.
Prepare for replacement
The following steps provide the complete procedure for this topic.
1. Print-zone filters are provided with your printer in the printer yearly maintenance kit. Sets of two
filters are provided; only one filter is needed for this operation.
2. Ensure that the printer is not printing.
3. If a job has just been printed, wait about 20 minutes for the printer to cool down.
4. You are recommended to wear gloves and mask.
5. Ensure that all windows, covers, and doors are closed and remain in their original positions.
6. Turn off the printer.
Replace the print-zone filter
The following steps provide the complete procedure for this topic.
Table 11-18 Warning labels
Risk of burns Crush hazard Risk of trapped
finger
s
Hazardous moving
part
Light radiation
hazard
Electric shock
hazard
For more safety information, see Safety precautions on page 4
224 Chapter 11 Hardware maintenance
To Next Page
Loading...