8. Once again, look at the lines at the right side of the pattern (blue box) and, from right to left, count
the number of complete lines, which may range from 0 to 7. In the example below, the number is 4.
NOTE: A line is complete if it extends across the width of the roll. Such a line should be counted
e
ven if it contains short breaks, as indicated above by blue arrows.
IMPORTANT: If you see no complete lines in this fine-tuning adjustment, so that you have to enter
the number 0 (z
ero), the adjustment will fail. In this case, contact your support representative.
Adjustment procedure 241
To Next Page
Loading...