3. Remove and dispose of the old filter according to local regulations, and insert the new one.
4. Carefully put back the filter cover.
Finish replacement
The following steps provide the complete procedure for this topic.
1. Ensure that all windows, covers, and doors are closed and remain in their original positions.
2. Turn on the processing station.
3. After replacing the filters, the customer must reset the counter to zero in the utilities menu.
Prepare for replacement
The following steps provide the complete procedure for this topic.
1. Locate the replacement filters provided in the Processing-station maintenance kit.
2. You are recommended to wear gloves, mask, and safety goggles.
3. Ensure that all windows, covers, and doors are closed and remain in their original positions.
4. Turn off the processing station.
Replace an e-box fan filter
This is the procedure to replace the e-box fan filter.
294 Chapter 11 Hardware maintenance
To Next Page
Loading...