4. Take the purge tool from the drawer and place it on the side of the working area.
5. Connect the material loading nozzle to the reusable material collector with the purge tool.
CAUTION: Ensure that the hoses are connected properly. The loading nozzle should be connected
t
o the top and the material collector to the side. If the loading nozzle is correctly connected, the
hose should slope gradually downwards; it should not have an āSā shape.
TIP: Tape the unpacking hose and the loading hose to the purge tool to prevent interruptions
during the pr
ocess. If the process is interrupted, the user should start it from scratch, cleaning
included.
a.
Purge the processing station 57
To Next Page
Loading...