180 Using the Embedded Web Server EN
NDS Context To disable NDS support, leave this field blank.
The print server's NDS context refers to the NDS container or
organizational unit that contains the print server object. Print
queue and device objects can be located anywhere within the
NDS tree, but the HP Jetdirect print server must be configured
with the fully-qualified print server object name.
For example, if the print server object is found in the container
"marketing.mytown.lj" and the print server object name is
"lj_pserver", the fully qualified print server context name (CN) is:
"CN=lj_pserver.OU=marketing.OU=mytown.O=lj" (where OU is
an Organization Unit container and O is an Organization
container within the NDS tree).
Note: NDS objects cannot be created by the embedded web
server.
Job Poll Interval Specifies the time interval (seconds) that the HP Jetdirect print
server will wait to check for print jobs in a print queue.
PJL Configuration For Printer Job Language (PJL) parameters, enable (check) or
disable (clear) the parameters provided:
● Banner Pages (for printing separator pages between print
jobs)
● End-Of-Job Notification (if received from the printer, an
end-of-job message will be forwarded to a client application)
● Toner Low Notification (if received from the printer, the
HP Jetdirect print server will forward a “toner low” message
to a client application)
Table B.3 IPX/SPX Settings (2 of 2)
Item Description
To Next Page
Loading...
