HP Retail Integrated
Fingerprint Reader
Installation Instructions
Copyright © 2012 Hewlett-Packard Development Company, L.P. The
information contained herein is subject to change without notice.
Printed in
691053-003
NO TE: Refer to the HP L6015tm and L6017tm Retail Touch
Monitors User Guide, the HP RP7 Retail System Model 7800
Hardware Reference Guide, or the HP RP7 Retail System Model
7100 Hardware Reference Guide at www.hp.com
for detailed
instructions on installing USB modules.
CAUTION: This accessory is for use only with compatible UL
Listed host products that have been evaluated for the operating
altitude up to 3048m/10,000 feet. Use only with Listed ITE.
Installing Drivers for the Fingerprint Reader
The drivers for the Fingerprint Reader are available on the CD included
with the Retail Touch Monitors and pre-loaded on the HP RP7 Retail
Systems. You can also download the latest drivers from www.hp.com
.
Configuring the Fingerprint Reader for the HP
L6015tm and L6017tm Retail Touch Monitors
To configure the Fingerprint Reader, insert the CD included with this
product and refer to the HP Point of Sale Configuration Guide
(available in English only).
Configuring the Fingerprint Reader for the HP
RP7 Retail System Models 7800 and 7100
To configure the Fingerprint Reader, refer to the HP Point of Sale
Configuration Guide (available in English only). The guide is available
on the HP factory image of the RP7 system's hard drive and at
www.hp.com
. To access the guide on the factory image:
• In Windows Embedded POSReady 2009, select Start > All
Programs > HP Point of Sale Information.
• In Windows 7 or Windows Embedded POSReady 7, select Start
> HP Point of Sale Information.
HP L6015tm and L6017tm Retail Touch Monitors
HP RP7 Retail System Model 7800
RP7 7800
RP7 7100
L6015tm
L6017tm
To Next Page
Need help?
General
