Optional 500-sheet paper feeder
The optional 500-sheet paper feeder is designed so that you can access its components
without removing the printer. The major components are located along the sides of the paper
feeder.
Paper feeder left cover
Use the following steps to remove the paper feeder left cover.
To remove the 500-sheet paper feeder left cover
1. Remove the cassette.
2. Remove the screw shown in callout 1, and remove the front left cover shown in callout 2.
Figure 6-86.
Removing and replacing the 500-sheet paper feeder left cover (1 of 2)
ENWW Optional 500-sheet paper feeder 249
To Next Page
Loading...