Q1342-90910 External assemblies 29
Top cover
1 Remove the following assemblies:
z Toner cartridge, media tray, and cable pod. See “Toner cartridge”
on page 15 through “Cable pod” on page 17
z Left side, back, and right side covers. See “Left side cover” on
page 18 through “Right side cover” on page 24.
2 Open the toner cartridge door.
3 Loosen, but do not remove, the two screws (callout 1) on the
back of the printer.
4 Remove the two screws (callout 2) on the top of the printer.
5 Lift the cover off of the printer.
Figure 18. Remove the top cover
2
2
1
2
To Next Page
Loading...